As an Amazon Associate I earn from qualifying purchases.

1. Aprilaire

#ad

Aprilaire 51 120V Current Sensing Relay

#adAprilaire #ad - Sensing current: Minimum of 4. 0 amps. Voltage range: 100-125 vaC, 50-60 Hz. It can also be used to simplify installation of inline duct booster fans. The aprilaire #51 current sensing relay simplifies air cleaner installation on furnaces without accessory terminals.

Brand	Aprilaire #ad
Manufacturer	Aprilaire #ad
Height	1.3 Inches
Length	3.4 Inches
Weight	1 Pounds
Width	2.8 Inches
Part Number	FBA_51
Model	CECOMINOD023807

2. PX

#ad

Refrigerator/freezer overload relay kit for 4387913 7020935 4387766 4387836

#adPX #ad - Can be used for whirlpool, GE, Amana, Frigidaire, Maytag, Subzero etc.120v hot wire goes to overload, neutral wire goes to prong 2 on relay. Refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #'s 4387913 7020935 4387766 4387836. This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4. 7 ohms. Capacitor if present can connect to prongs 1 and 3 on relay.

Brand	PX #ad
Manufacturer	PX #ad
Part Number	4387913 7020935 4387766 4387836

3. ICM

#ad

ICM Controls ICM203F Delay On Break Timer with 0.03-10 Minutes Adjustable Timing and 6 Lead Wires,Multicolor

#adICM #ad - Adjustable timing. Helps to protect compressors from damage caused by rapid short cycling. Universal voltage. Compressor lockout/anti-short cycle timer. Simple, 2-wire hookup.

Brand	ICM #ad
Manufacturer	ICM #ad
Height	6 Inches
Length	6 Inches
Width	6 Inches
Part Number	ICM203FB
Model	ICM203F

4. Supplying Demand

#ad

Supplying Demand IC102 Refrigerator Compressor PTC Start Relay Universal Fit

#adSupplying Demand #ad - Cheaper alternative than traditional relays that can cost 10 times more. Comes in Supplying Demand packaging. Compatible with all major brands. Universal item. Easy to install. Make sure to unplug the unit before installing.

Brand	Supplying Demand #ad
Manufacturer	Supplying Demand #ad
Part Number	SDIC102
Warranty	All Supplying Demand products come with a 60-day money back guarantee and 1-year warranty. Meaning any product can be returned within 60 days no questions asked for a full refund or replaced within 1 year provided a model and serial number are presented.

5. Inkbird

#ad

Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier DehumidifierNew Version

#adInkbird #ad - Alarm when humidity exceeds high/low humidity setting value;. Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature;. Alarm when sensor error or humidity exceeds limit;. Humidity measuring range: 5~99. 99%rh; humidity control range: 5~99%RH; Accuracy: ±3%RH. Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;.

Brand	Inkbird #ad
Manufacturer	lerway tech #ad

6. American Zettler

#ad

Zettler Mini Power Relay SPST 120V 30A AZ2280-1A-120AF Pack of 2

#adAmerican Zettler #ad - A powerful relay in a small package! Epoxy sealed versions available. Az2280-1a-120af pack of 2. Ul class f 155°C standard. Miniature Power Relay.

Brand	American Zettler #ad
Manufacturer	American Zettler #ad
Part Number	AZ2280-1A-120AF ( X2)

7. Thalia

#ad

Refrigerator/freezer overload relay kit for 4387913 7020935 4387766 4387836

#adThalia #ad - Can be used for whirlpool, Maytag, GE, Frigidaire, Amana, Subzero etc.120v hot wire goes to overload, neutral wire goes to prong 2 on relay. Capacitor if present can connect to prongs 1 and 3 on relay. This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4. 7 ohms. Refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #'s 4387913 7020935 4387766 4387836.

Brand	Thalia #ad
Manufacturer	Thalia #ad
Part Number	4387913 7020935 4387766 4387836

8. Inkbird

#ad

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

#adInkbird #ad - Centigrade or fahrenheit degree display, PV and SV dual display windows. Itc-608t thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. Temperature control range is -40-212°f-40-100℃, humidity display range is 5 -99.

0%rh. Supporting calibration, easy to set, compressor delay and saving reset setting values. And with compressor delay for protecting cooling device. Max loading: 120v 15A 1800W. More power up to 1800w. Us etl certificate listed. Three in one multifunctional temperature and humidity control mode with dual relay output. First, only plug humidity sensor with humidifier and dehumidifier equipment. Itc-608t can save the original setting values in case accidentally power-off.

Multifunctional usage. Second, a humidity controller, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment. Temperature and humidity controller itC-608T can be used in home brewing refrigerator, Greenhouse, planting mushroom, fermenting, terrarium, reptile, meat storage and cooking. Temperature senor is waterproof while humidity sensor is not. Itc-608t can work as a temperature controller, a temperature and humidity controller.

Brand	Inkbird #ad
Manufacturer	Inkbird #ad
Part Number	ITC-608TH

9. Inkbird

#ad

Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier

#adInkbird #ad - Alarm when sensor error or humidity exceeds limit;. Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature. Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;. Humidity measuring range: 5~99. 99%rh; humidity control range: 5~99%RH; Accuracy: ±3%RH. Alarm when humidity exceeds high/low humidity setting value;.

Brand	Inkbird #ad
Manufacturer	LERWAY TECH #ad
Part Number	IHC200-1

10. DIGITEN

#ad

DIGITEN Digital Humidity Controller Humidistat Pre-Wired Plug Simple-Stage AC 110V -240V with High Accuracy Humidity Sensor for Dehumidifier Humidifier Reptiles Greenhouse Exhaust Fan Fermentation

#adDIGITEN #ad - Easy to use and program, switch different modes between humidification and dehumidification automatically, Dehumidify Mode & Humidify Mode. It is plug and play transducers designed for OEM applications where reliable and accurate measurements are needed.

Display the sensed humidity, setting humidity, and custom icons on the display indicate working mode. With a humidity correction function. Only 2-steps setting for your application, plug-n-play design. Allow user to adjust measuring accuracy base to on different probe, etc. 12 month warranty! Widely used for koji fermentation, refrigerator, ventilator fan, meat curing room, dehumidify control, exhaust fan, humidifier control, grow tent, mini greenhouse, mushroom, bathroom, etc.

High and low humidity alarms are available, crawl space, over-humidity and sensor error alarm. Reliable and highly accurate humidify sensor. Large lcd screen.

Brand	DIGITEN #ad
Manufacturer	DIGITEN #ad
Part Number	DTC102Z