Hi-Lift Jack HL604 60″ Hi-Lift Black Cast and Steel Jack

#ad
#ad
ARB HLJHL604 #ad - Made of cast & Stamped Steel Parts. For greater safety, all hi-lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds. With a full range of specially designed accessories, farming, the Hi-Lift jack is just about the most versatile piece of off-roading, auto recovery equipment you can buy.

Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks. Performance characteristics and weight capacity remain the same as the all-cast Hi-Lift jacks but at a lower price. Although light in weight and easy to manuever, 660 pounds 2114kg and a tested load capacity of 7, the Hi-Lift Jack offers a rated load capacity of 4, 000 pounds 3175kg, achieving a 150% safety factor.

Hi-Lift Jack HL604 60" Hi-Lift Black Cast and Steel Jack #ad - Our jacks are designed to help you survive in the most demanding situations - whether you are in the Moab desert canyons, the Welsh mountains, the Amazon jungle or the farmlands of Indiana. When its a heavy duty situation, the tool had better be a Hi-Lift! The hi-lift jack hl604 60 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.

. The hi-lift jack hl604 60 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components. With over 100 years of quality, the hi-lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pulling, pushing, winching and clamping.

Two piece handle and socket is durable and reliable.

More information about ARB HLJHL604 #ad

Hi-Lift Jack ORB Off-Road Base

#ad
#ad
ARB ORB #ad - Compatible with all Hi-Lift jacks. Serrated teeth along one side helps scrape or level ground for base. A clean, flat surface gives the Off-Road Base better footing and greater stability during the lifting process. A drilled hole in the center of the base allows the off-Road Base to be attached to a Hi-Lift jack bar for storage when not in use, using an owner supplied 5/16 inch x 4 inch bolt and wing nut.

Hi-Lift Jack ORB Off-Road Base #ad - Drilled hole in center of base for convenient storage on jack bar. Alleviates jack sinkage on soft surfaces. Molded in high visibility red, making it harder to leave behind when the task is completed. Rugged construction for strength and durability. These teeth allow the user to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use.

The hi-lift jack off-road Base is designed to alleviate jack sinkage on soft surfaces. The off-road base is compatible with all Hi-Lift jacks. Newly designed, the Off-Road Base includes serrated teeth along one side of the base.

More information about ARB ORB #ad


Similar products



Hi-Lift Jack HK-B Black Handle-Keeper

#ad
#ad
ARB HK-B #ad - Alleviates jack sinkage on soft surfaces. Serrated teeth along one side helps scrape or level ground for base. Easily slips on and off for quick, no hassle removal when you need to use your jack. Rugged construction for strength and durability. Molded in black. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from rugged polyurethane material. Drilled hole in center of base for convenient storage on jack bar. Compatible with all Hi-Lift jacks. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

More information about ARB HK-B #ad


Similar products



Hi-Lift Jack LM-100 Lift-Mate

#ad
#ad
ARB LM100 #ad - Molded in black. Serrated teeth along one side helps scrape or level ground for base. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

Rugged construction for strength and durability. Easily slips on and off for quick, no hassle removal when you need to use your jack. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Compatible with all Hi-Lift jacks. Many trucks and suv's have larger tires and/or lift kits that can prevent use of a standard Hi-Lift jack, when lifting from a bumper, due to exceeding the lifting length of the jack.

Hi-Lift Jack LM-100 Lift-Mate #ad - Rubber pad protects tire/wheel at lifting point on jack. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. 5, 000 pound lift capacity. Alleviates jack sinkage on soft surfaces.

More information about ARB LM100 #ad


Similar products



Hi-Lift Jack BL-250 Bumper Lift

#ad
#ad
ARB BL-250 #ad - Drilled hole in center of base for convenient storage on jack bar. Easily slips on and off for quick, no hassle removal when you need to use your jack. The hi-lift jack bumper lift is designed to fit most curved steel bumpers for quick, easy lifting when used with a Hi-Lift jack. Lifting capacity of 3000 pounds.

Alleviates jack sinkage on soft surfaces. Compatible with all Hi-Lift jacks. Rugged construction for strength and durability. The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles.

Hi-Lift Jack BL-250 Bumper Lift #ad - The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles. Designed to fit most curved steel bumpers. Molded in black. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. 5, 000 pound lift capacity. Rubber coated hooks protect wheels. Rubber pad protects tire/wheel at lifting point on jack.

More information about ARB BL-250 #ad


Similar products



Hi-Lift Jack ORK Off-Road Kit

#ad
#ad
ARB ORK #ad - The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Compatible with all Hi-Lift jacks. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Rubber coated hooks protect wheels. Includes eight foot tree saver strap.

Use this kit to turn your Hi-Lift jack into an even more versatile tool. Includes winch tensioner. Lifting capacity of 3000 pounds. Rugged construction for strength and durability. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Hi-Lift Jack ORK Off-Road Kit #ad - Crafted from rugged polyurethane material. Molded in black. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Includes custom nose attachment. Use this kit to turn your Hi-Lift jack into an even more versatile tool. Drilled hole in center of base for convenient storage on jack bar.

More information about ARB ORK #ad


Similar products



Hi-Lift Jack HK-R Red Handle-Keeper

#ad
#ad
ARB HK-R #ad - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from rugged polyurethane material. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Includes eight foot tree saver strap. Quick and easy to use. Also includes a pair of Hi-Lift gloves, necessary hardware and gear bag. Rubber coated hooks protect wheels.

Hi-Lift Jack HK-R Red Handle-Keeper #ad - Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Easily slips on and off for quick, no hassle removal when you need to use your jack. Molded in black. The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles.

Designed to fit most curved steel bumpers. Use this kit to turn your Hi-Lift jack into an even more versatile tool.

More information about ARB HK-R #ad


Similar products



Hi-Lift Jack NJC Neoprene Jack Cover

#ad
#ad
ARB NJC #ad - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Machine washable. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel.

Molded in red. Serrated teeth along one side helps scrape or level ground for base. Alleviates jack sinkage on soft surfaces. Also includes a pair of Hi-Lift gloves, necessary hardware and gear bag. Easily slips on and off for quick, no hassle removal when you need to use your jack. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis.

Hi-Lift Jack NJC Neoprene Jack Cover #ad - Lifting capacity of 3000 pounds. Use this kit to turn your Hi-Lift jack into an even more versatile tool. Includes winch tensioner. Includes eight foot tree saver strap. Rubber pad protects tire/wheel at lifting point on jack. The hi-lift jack neoprene jack cover protects Hi-Lift jacks from mud, dirt and road grime, greatly reducing the effects from exposure to the elements on the jack.

Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

More information about ARB NJC #ad


Similar products



Seven Sparta Off-Road Base for Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
#ad
Seven Sparta 5823933466 #ad - Give the off-road Base better footing and greater stability during the lifting process. Alleviates jack sinkage on soft surfaces. Drilled hole in center of base for convenient storage on jack bar. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Includes custom nose attachment.

5, 000 pound lift capacity. Rubber pad protects tire/wheel at lifting point on jack. Fast drying. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material.

Seven Sparta Off-Road Base for Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red #ad - Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Quick and easy to use. Easily slips on and off for quick, no hassle removal when you need to use your jack. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag.

Easily slips on and off for quick, no hassle removal when you need to use your jack. If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Uv protected.

More information about Seven Sparta 5823933466 #ad


Similar products



Daystar, Red Jack Handle Isolator, reduce jack handle rattling, KU71071RE, Made in America , Red

#ad
#ad
Daystar KU71071RE #ad - Rubber pad protects tire/wheel at lifting point on jack. One side with serrated teeth: helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. They are corrosion resistant and facilitate hassle free transporting of jack. These isolators are red in color and made from high quality material that ensures long lasting durability.

Daystar, Red Jack Handle Isolator, reduce jack handle rattling, KU71071RE, Made in America , Red #ad - Molded in red. Also includes a pair of Hi-Lift gloves, necessary hardware and gear bag. A drilled hole in center of base attached to your jack bar, store it easy. Uv protected. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.

Includes custom nose attachment. Quick and easy to use. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Molded in black.

More information about Daystar KU71071RE #ad


Similar products



BOAR Hi Lift Jack Mate BLUE

#ad
#ad
OFFROAD BOAR #ad - Includes eight foot tree saver strap. Fast drying. Give the off-road Base better footing and greater stability during the lifting process. Heavy duty, all steel construction for long life and durability. Quick and easy to use. Use this kit to turn your Hi-Lift jack into an even more versatile tool. Includes winch tensioner.

Quickly fits all types of farm jacks. Facilitates hassle free transportation. Easily slips on and off for quick, no hassle removal when you need to use your jack. Includes custom nose attachment. Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag.

BOAR Hi Lift Jack Mate BLUE #ad - Machine washable. Lifting capacity of 3000 pounds. Using this device on your farm jack is far safer option as the load is suspended and will not slip out with minor movement. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height. The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles.

More information about OFFROAD BOAR #ad


Similar products