CMR UltraFlex 31 Inch Micro Right Angle HDMI Male to Standard HDMI Male Cable. 90 Degree Thin HDMI Cable. HDMI 2.0


Camera Motion Research RAMIHDMI22 - 31 inch long cable length. 31 inch long cable length. Perfect for Gimbal stabilizer and small clearance areas. Weighs 17 grams. Ultra flexible light weight right angle micro HDMI male to standard HDMI cable. Hdmi 2. 0 supports up to 4096 x 2160 4K Resolution. Cable strain relief on both heads to increase the lifespan of your device and HDMI cable.

33. 5 total length. 33. 5 total length. Weighs 17 grams. Cable strain relief on both heads to increase the lifespan of your device and HDMI cable. Search camera motion research overmolded cable or go to our store Ultra flexible 90 degree micro to straight Standard HDMI. Search camera motion Research or overmolded hdmi cable or go to our store for more cables.

CMR UltraFlex 31 Inch Micro Right Angle HDMI Male to Standard HDMI Male Cable. 90 Degree Thin HDMI Cable. HDMI 2.0 - Ultra flexible OD:2. 5mm.

More information about Camera Motion Research RAMIHDMI22

SMALLRIG Quick Release Safety Rail 4cm 1.57 Inches Long with 1/4'' Screws - 1409


SMALLRIG Safety-Rail-4cm-1409 - Compatibility: universalpackage includes: 1 x 46mm nato rail 1 x hex spanner 4 x 1/4" screwproduct dimensions: 45x20x12 mmNet Weight: 38gPackage Size: 110x130x40 mmMaterials: Aluminum Alloy Smallrig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle.

The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with all the accessories with standard nato clamp or 1/4" threaded, slide mount, such as with nato handle, Camera for RED Epic/Scarlet, for Black Magic and other third party accessories. It can be attached to any two 1/4-20 holes via 2 1/4-20 screws included to provide a mount for QR-Handles, EVF mount, nato clamp, and so on.

SMALLRIG Quick Release Safety Rail 4cm 1.57 Inches Long with 1/4'' Screws - 1409 - Includes: 1 x 4cm safety rail, 1 x hex spanner, 2 x 1/4'' screw. 2. Smallrig quick release Safety Rail 46mm 1409 1. Spring-loaded pin on each end of the rail prevents accidental removal. 3. It could attach the cage with 1/4''-20 threaded holes via two 1/4'' screws. 4. It is small, lightweight and durable.

More information about SMALLRIG Safety-Rail-4cm-1409


Similar products



Atomos Right-Angle Micro to Full HDMI Coiled Cable 11.8 to 17.7"


Atomos ATOMCAB007 - Limited 1-Year Warranty. Smallrig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle. The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with all the accessories with standard nato clamp or 1/4" threaded, such as with nato handle, Camera for RED Epic/Scarlet, slide mount, for Black Magic and other third party accessories.

It can be attached to any two 1/4-20 holes via 2 1/4-20 screws included to provide a mount for QR-Handles, EVF mount, nato clamp, and so on. Includes: 1 x 4cm safety rail, 1 x hex spanner, 2 x 1/4'' screw. The atomos right-angle micro to Full HDMI Coiled Cable 11. 8-17. 7 in. Has right-angled micro connector for use with the Ninja Star recorder, is also fully compatible for any device with a either a micro HDMI port or a full-size HDMI port.

Atomos Right-Angle Micro to Full HDMI Coiled Cable 11.8 to 17.7" - This cable is coiled to avoid clutter and extends up to 17. 7 inches. Materials: Aluminum Alloy. It is called as a type-d HDMI to Type-A HDMI cable. The connectors are made with tight fittings for perfect connections an efficient data transfer.

More information about Atomos ATOMCAB007


Similar products



SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138


SMALLRIG 1138 - The rod clamp fits dji ronin & freefly moVI Pro & all 30mm rods and can also be adjusted with ease. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable. Smallrig multi-function double Ballhead with Clamp & 1/4" Screw 1138 1. Materials: Aluminum Alloy. It can mount monitor and LED Lights on the one end via 1/4'' screw.

The best load < 1. 21kg. 4. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. It can mount monitor and led lights on the one end via 1/4'' screw, and it can lock the rod on the cage via the clamp tightened by the locking knob.

SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138 - It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. The rod clamp fits dji ronin & freefly movI Pro & all 30mm rods and can also be adjusted with ease. The best load < 1. 21kg. Compatibility: universalpackage includes: 1 x ballheadproduct dimensions: 95x85x25mmNet Weight: 200gPackage Size: 120x100x40mmMaterials: Aluminum Alloy Smallrig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle.

The spring-loaded pin on each end of the rail prevents accidental accessory detachment.

More information about SMALLRIG 1138


Similar products



DSTE 2X Replacement Li-ion NP-F970 Battery for Sony DCM-M1 MVC-CD1000 HDR-FX1 DCR-VX2100E DSR-PD190P NEX-FS700RH HXR-NX3 Camera as NP-F930 NP-F950 NP-F960


DSTE FBA_DASY03A2 - High capacity for Stamina. Battery capacity : 58. 5wh/7900mAh. Output voltage : dc 8. 4v max/ DC 7. 2v mean. Info function for Life Indication. In the box: - 2x brand new battery - 2 years warranty work for: - ccd-rv100 - ccd-rv200 - ccd-sc5 - ccd-sc5/e - ccd-sc55e - ccd-sc55 - ccd-sc6 - ccd-sc65 - ccd-sc7 - ccd-sc7/e - ccd-sc8/e - ccd-sc9 - ccd-tr1 - ccd-tr11 - ccd-tr1100e - ccd-tr12 - ccd-tr18 - ccd-tr18e - ccd-tr1e - ccd-tr2 - ccd-tr200 - ccd-tr205 - ccd-tr215 - ccd-tr2200e - ccd-tr2300 - ccd-tr2300e - ccd-tr280pk - ccd-tr290pk - ccd-tr3 - ccd-tr300 - ccd-tr3000 - ccd-tr3000e - ccd-tr3100e - ccd-tr311e - ccd-tr315 - ccd-tr315e - ccd-tr317 - ccd-tr3200e - ccd-tr3300 - ccd-tr3300e - ccd-tr411e - ccd-tr412e - ccd-tr413 - ccd-tr414 - ccd-tr415e - ccd-tr416 - ccd-tr417 - ccd-tr417e - ccd-tr425e - ccd-tr427 - ccd-tr427e - ccd-tr500 - ccd-tr511e - ccd-tr512e - ccd-tr515e - ccd-tr516 - ccd-tr516e - ccd-tr517 - ccd-tr555 - ccd-tr57 - ccd-tr610 - ccd-tr617 - ccd-tr617e - ccd-tr618 - ccd-tr618e - ccd-tr640e - ccd-tr67 - ccd-tr710 - ccd-tr713e - ccd-tr716 - ccd-tr717 - ccd-tr717e - ccd-tr718 - ccd-tr718e - ccd-tr728 - ccd-tr728e - ccd-tr730e - ccd-tr76 - ccd-tr760e - ccd-tr810e - ccd-tr818 - ccd-tr840e - ccd-tr845e - ccd-tr87 - ccd-tr910 - ccd-tr913e - ccd-tr917 - ccd-tr918 - ccd-tr918e - ccd-tr930 - ccd-tr940 - ccd-tr97 - ccd-trv15 - ccd-trv16- pt-176s, yn760, oe-160c, yn900, yn300 iii, l132t, jyled-300s, yn300 air, yn600 air, yn600l ii, jyled-500s, cn-576, yn168, yn608, yn300 ii, vls50b smallrig 1409 is a 46mm standard quick release safety rail, yn300, yn600 rgb, cn-160, yn308, cn-216, yn860, vl40t, oe-160, vl162t, yn360, yn1200, YN1410 - L116T, YN608 RGB, CN-304 - YN160 III, YN600S, L132B, YN216, which can serve as part of quick release nato handle.

The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with all the accessories with standard nato clamp or 1/4" threaded, Camera for RED Epic/Scarlet, slide mount, such as with nato handle, for Black Magic and other third party accessories. It can be attached to any two 1/4-20 holes via 2 1/4-20 screws included to provide a mount for QR-Handles, EVF mount, nato clamp, and so on.

DSTE 2X Replacement Li-ion NP-F970 Battery for Sony DCM-M1 MVC-CD1000 HDR-FX1 DCR-VX2100E DSR-PD190P NEX-FS700RH HXR-NX3 Camera as NP-F930 NP-F950 NP-F960 - Includes: 1 x 4cm safety rail, 1 x hex spanner, 2 x 1/4'' screw.

More information about DSTE FBA_DASY03A2


Similar products



SMALLRIG Monitor Mount Holder for DJI Ronin S Gimbal Accessories Mounting Plate, w/ 1/4” Thread 3/8” Locating Hole NATO Rail for Magic Arm Handle - 2214


SMALLRIG - 2. Multiple 1/4"-20 threaded holes for accessory attachment. Light weight: weight only 009 lb 40g. Battery capacity : 58. 5wh/7900mAh. 3. Features a nato rail to compatible with nato clamp accessories. 5. Lightweight and multifunctional design. High capacity for Stamina. Output voltage : dc 8. 4v max/ DC 7. 2v mean. It will not add the weight.

Nato rail: comes with nato rail for the Nato Side Handle 1688/2187. It provides multiple mounting holes for accessories attachment such as monitor mount 2070 Smallrig mounting plate for DJI Ronin S 2214 Key Features: 1. Compatible for DJI RoninS Handheld Gimbal. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top.

SMALLRIG Monitor Mount Holder for DJI Ronin S Gimbal Accessories Mounting Plate, w/ 1/4” Thread 3/8” Locating Hole NATO Rail for Magic Arm Handle - 2214 - It can mount monitor and led lights on the one end via 1/4'' screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. The rod clamp fits dji ronin & freefly movI Pro & all 30mm rods and can also be adjusted with ease.

The best load < 1.

More information about SMALLRIG


Similar products



Zhiyun Mini Dual Grip, Transmount Single Handle Grip L Bracket Rig 1/4 Screw Connector for Zhiyun Crane 2 Crane Plus Crane M V2 Series DJI Ronin-S Handheld Gimbal Stabilizer w/EACHSHOT Cleaning Cloth


Zhiyun TransMount Mini Dual Grip - 3/8"holes for arri standard is attached to accessory with locating pins. It provides multiple mounting holes for accessories attachment such as monitor mount 20702. Get the small screw base ready and tighten it to the 1/4" threaded hole of monitor, fill light or microphone etc. Basic paarameters: Size: L197*W186.

5*h47mm weight: 235g 1/4" threaded hole: 3 compatible Stabilizer Models: Crane Series and other Handle Gimbal which has 1/4 ScrewInstallation: 1. 3. Output voltage : dc 8. 4v max/ DC 7. 2v mean. High capacity for Stamina. Installations: it is fixed on the side of Gimbal for Ronin S via two M4 screws after taking off the small plate for DJI which covers the electronic contacts.

Zhiyun Mini Dual Grip, Transmount Single Handle Grip L Bracket Rig 1/4 Screw Connector for Zhiyun Crane 2 Crane Plus Crane M V2 Series DJI Ronin-S Handheld Gimbal Stabilizer w/EACHSHOT Cleaning Cloth - Battery Type : Li-ion. Limited 1-Year Warranty. Multiple mounting holes: 1/4"threads could be attached to other accessories like cold shoe, bracket. As needed. Two 1/4" threaded holes can be found at the bottom of the Mini Dual Grip. More camera kits such as supportive grip can be mounted.

More information about Zhiyun TransMount Mini Dual Grip


Similar products



NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger


RAVPower US-RP-BC006-011 - Record for longer with your video camera raVPower Replacement Batteries feature a higher-density 2900mAh capacity that ups the 2200mAh of the original. Materials: Aluminum Alloy. Multiple mounting holes: 1/4"threads could be attached to other accessories like cold shoe, bracket. It provides multiple mounting holes for accessories attachment such as monitor mount 2070

3/8"holes for arri standard is attached to accessory with locating pins. Elevated compatibility: drastically increases runtime of your Sony cameras, including NX5 / TRV1 / TRV3 and TRV9E /46E / 49E series see the description for the full compatibility list. Secure construction, over voltage, short circuit, reliable charging: Features overcharge, over discharge, and overheating protections, as well as a fire-resistant build.

NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger - Installations: it is fixed on the side of Gimbal for Ronin S via two M4 screws after taking off the small plate for DJI which covers the electronic contacts. And the ravpower 2-pack replacement battery kit is no exception! In addition to overcharge, over discharge, and overheating safeguards, over voltage, short circuit, the shell is fire-resistant for enhanced safety.

Note: 1. In real life usage, this translates to up to 4 hours of video recording per battery so you'll have plenty of juice to capture life's special moments. Info function for Life Indication.

More information about RAVPower US-RP-BC006-011


Similar products



Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P


Powerextra 1006587 - Enables you to mount on monitor or microphone or fill light on Single Mini Dual Handheld Grip used with Gimbal Stabilizer. Kindly note: the wall charger, car charger, car charger and power bank are not included in the package. Record for longer with your video camera: Shoot videos for up to 3. 5-4 hours per battery while others last for barely 2 hours.

Suitable for zhiyun crane 2 crane Plus Crane M Series and other Handheld Gimbal which has 1/4 Screw. Materials: Aluminum Alloy. Compatible with the following sony handycam camcorders: - ccd-rv100 - ccd-rv200 - ccd-sc5 - ccd-sc5/e - ccd-sc55e - ccd-sc55 - ccd-sc6 - ccd-sc65 - ccd-sc7 - ccd-sc7/e - ccd-sc8/e - ccd-sc9 - ccd-tr1 - ccd-tr11 - ccd-tr1100e - ccd-tr12 - ccd-tr18 - ccd-tr18e - ccd-tr1e - ccd-tr2 - ccd-tr200 - ccd-tr205 - ccd-tr215 - ccd-tr2200e - ccd-tr2300 - ccd-tr2300e - ccd-tr280pk - ccd-tr290pk - ccd-tr3 - ccd-tr300 - ccd-tr3000 - ccd-tr3000e - ccd-tr3100e - ccd-tr311e - ccd-tr315 - ccd-tr315e - ccd-tr317 - ccd-tr3200e - ccd-tr3300 - ccd-tr3300e - ccd-tr411e - ccd-tr412e - ccd-tr413 - ccd-tr414 - ccd-tr415e - ccd-tr416 - ccd-tr417 - ccd-tr417e - ccd-tr425e - ccd-tr427 - ccd-tr427e - ccd-tr500 - ccd-tr511e - ccd-tr512e - ccd-tr515e - ccd-tr516 - ccd-tr516e - ccd-tr517 - ccd-tr555 - ccd-tr57 - ccd-tr610 - ccd-tr617 - ccd-tr617e - ccd-tr618 - ccd-tr618e - ccd-tr640e - ccd-tr67 - ccd-tr710 - ccd-tr713e - ccd-tr716 - ccd-tr717 - ccd-tr717e - ccd-tr718 - ccd-tr718e - ccd-tr728 - ccd-tr728e - ccd-tr730e - ccd-tr76 - ccd-tr760e - ccd-tr810e - ccd-tr818 - ccd-tr840e - ccd-tr845e - ccd-tr87 - ccd-tr910 - ccd-tr913e - ccd-tr917 - ccd-tr918 - ccd-tr918e - ccd-tr930 - ccd-tr940 - ccd-tr97 - ccd-tRV15 - CCD-TRV16 Smallrig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle.

Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P - The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with all the accessories with standard nato clamp or 1/4" threaded, Camera for RED Epic/Scarlet, slide mount, such as with nato handle, for Black Magic and other third party accessories. It can be attached to any two 1/4-20 holes via 2 1/4-20 screws included to provide a mount for QR-Handles, nato clamp, EVF mount, and so on.

More information about Powerextra 1006587


Similar products



SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060


SMALLRIG 4332041552 - Suitable for zhiyun crane 2 crane Plus Crane M Series and other Handheld Gimbal which has 1/4 Screw. Limited 1-Year Warranty. The arrowheads on the cold shoe show the direction to mount additional accessories. Kindly note: the wall charger, car charger, car charger and power bank are not included in the package.

Record for longer with your video camera: Shoot videos for up to 3. 5-4 hours per battery while others last for barely 2 hours. Enables you to mount on monitor or microphone or fill light on Single Mini Dual Handheld Grip used with Gimbal Stabilizer. It has no memory effect or other negative effects in recharging.

SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060 - Powerextra offers a 30-day money back policy, 12-month limited guarantee against manufacturing defects from date of purchase. Utmost pre-sale and after-sale customer services are also guaranteed. Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, such as cage, handle and plate etc.

For dji ronin s: designed for dji ronins handheld Gimbal. High capacity for Stamina. Light weight: weight only 009 lb 40g.

More information about SMALLRIG 4332041552


Similar products



DJI Ronin M Thumb Controller


DJI 6958265122545 - Simple to setup and use, the dji ronin wireless Thumb Controller makes controlling your Ronin-M/Ronin-MX easier and more intuitive, even with only a single operator. Materials: Aluminum Alloy. Output voltage : dc 8. 4v max/ DC 7. 2v mean. High capacity for Stamina. Capture shots that are difficult or impossible now, and start using your gimbal to its full potential.

Smallrig 1409 is a 46mm standard quick release safety rail, which can serve as part of quick release nato handle. The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with all the accessories with standard nato clamp or 1/4" threaded, slide mount, such as with nato handle, Camera for RED Epic/Scarlet, for Black Magic and other third party accessories.

DJI Ronin M Thumb Controller - It can be attached to any two 1/4-20 holes via 2 1/4-20 screws included to provide a mount for QR-Handles, nato clamp, EVF mount, and so on. Includes: 1 x 4cm safety rail, 1 x hex spanner, 2 x 1/4'' screw. 3 ways to charge: power up via a wall charger, or even a powerbank; micro-USB 5V/2. 1a max input recharges 2 full batteries in just 6 hours.

Battery Type : Li-ion. Limited 1-Year Warranty.

More information about DJI 6958265122545


Similar products